Why Pool Table Refelting Means More Than Looks

By Leticia Jensen


Rips in the surface of your pool table can be very frustrating. There can be a small rip and it makes playing on it an interesting challenge. This means that, to not be accused of rigging the game in your favor, the felt should be repaired or replaced. A professional firm can do this pool table refelting and they will make sure it is right.

A small rip can be repaired by you if you have a lot of patience. Careful measurements must be made and the felt will have to be cut exactly right. The proper amount of adhesive will need to used and the area will need to be prepared properly, first. This is a test of your attention to detail as the repair must not interfere with that next game.

Regardless of whether it is a rip or the table is just a bit worn or faded, a complete recovering may be appropriate. There are many such companies who specialize in this work in the Denver, CO area. They will help you discover all of the items that are needed and give you some valuable insights into such things as the proper side of the felt to use.

You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.

The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.

When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.

The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.

The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.




About the Author:



No comments:

Post a Comment